You are here

2 posts / 0 new
Last post
Aperture won't install, pls help #1
bam2k's picture
by bam2k
August 28, 2013 - 5:52am

Ok so I know I'm a little behind with the most up to date software and hardware but hopefully someone knows what I can do…

So I purchased Aperture 1 when it came out in the beginning, and loved it. Always worked and no problems. I'm not normally one to update software at all, but last month I decided to do a full overhaul on my system.

I updated to OSX 10.6.8. Launched Aperture to work on some photos and it would just bounce on the dock, and not launch. I did a quick google search and found out that Aperture 1 would not work with 10.6.8, that was ok I get that. So I went to the apple website to download Aperture 2. The first install went as you would assume, noticed that I had a previous version of Aperture with a licensed key, and went to install. After it was done I went to launch it again, it bounced on the dock and I received the 'Aperture quit unexpectedly' message.

This is where the confusion happens and no one seems to know whats going on. I did some more looking around and found a few possible fixes but nothing has worked.

After some security updates, I tried again. Downloaded the Aperture 2 trial, just to get the ball rolling. Every time things seem to go off without a hitch. Installer runs, loads everything up, finishes with 'Successfully Installed'. However when I then go to Applications, nothing shows up? Perform a spotlight search for Aperture and only the install package shows up, no application. I have tried this about 10 times with the same results over and over, no application showing up.


Here is what I have tried so far:

-Fully uninstalled everything to do with Aperture, did a spotlight search to make sure all was gone, even went into folders that had Aperture items but did not show up in spotlight and deleted them.
-Downloaded the trial from 2 different locations.
-Created a new user as an admin, tried to instal from that user.
-Made sure I have rosetta installed as it is required for my computer to run Aperture 2

I have searched all over the net and no one else seems to have this problem. I have called my authorized apple dealer who I normally deal with and they had no idea. I contacted Apple and Pro Apps, they had no idea.

Hopefully someone can help me!

Thanks,

Matthew

Walter Rowe's picture
by Walter Rowe
August 29, 2013 - 2:20am

Is there a reason you would not want to upgrade to Aperture 3? It costs $80 in the Mac App Store. If your hardware is too old to run it, perhaps it is time to upgrade your hardware too. Apple will certainly no longer support 10.6.8 once 10.9 comes out in the fall.

What model of Mac are you doing this on? What processor is in it? The Aperture 2 Technical Specifications state:

Minimum Hardware Requirements

One of the following Mac computers:

Mac Pro
15- or 17-inch MacBook Pro
MacBook
Mac mini with an Intel Core Solo or Duo processor
iMac with a 1.8 GHz or faster PowerPC G5 or Intel Core Duo processor
Power Mac G5 with a 1.6 GHz or faster PowerPC G5 processor
15- or 17-inch PowerBook G4 with a 1.25 GHz or faster PowerPC G4 processor
1 GB of random-access memory (RAM)
2 GB of RAM required for Mac Pro

One of the following graphics cards:

ATI Radeon X600 Pro, X600 XT, X800 XT Mac Edition, X850 XT, X1600, X1900 XT, 9800 XT, 9800 Pro, 9700 Pro, 9600, 9600 XT, 9600 Pro, 9650, HD 2400 XT, or HD 2600 Pro
ATI Mobility Radeon 9700 or 9600
ATI Mobility X1600
NVIDIA GeForce FX 5200 Ultra, 6600, 6600 LE, 6800 Ultra DDL, 6800 GT DDL, 7300 GT, 7800 GT, or 8600M GT
NVIDIA Quadro FX 4500
Intel GMA950
DVD drive for installation

You may login with either your assigned username or your e-mail address.
Passwords are case-sensitive - Forgot your password?