> Subject: Can't convert Large Aperture library from 3.2 to 3.3
> Message: I was able to convert my smaller (10 GB to 100 GB) Aperture 3.2 library to Aperture 3.3. But when I try to convert my main large Aperture 3.2 library (1 TB), then the upgrading process runs up to step 7 of 7 (93 % complete and then gets stuck there for many many hours. I have force quitted the stuck upgrading process and repeated the process - with the same result. What can I do next to complete my database conversion and move on to using Aperture 3.3.
I have reviewed the Q & A's on your website but was not able to solve my specific problem!! Your support would be most appreciated.
> Thank you,
Make sure you’ve updated to Aperture 3.3.1 which fixed a library update problem. Joseph posted a tip about it here
Thomas
Hopefully, updating to 3.3.1 will solve this issue. If not, have you tried going through the Repair Permissions and Rebuild Database options for Aperture? (They were in the FAQ, but I just want to check.) Have you tried using Disk Utility on the Mac to repair permissions and Verify your drives?
If that doesn’t work, the next best option might be to create a new library that starts off as empty and then project by project export from the old library and import into the new one. That’s a bit tedious, but a safe option if you’re running into problems.