You are here

2 posts / 0 new
Last post
Runs all night long without coming to an end #1
Ulrich von Agris's picture
by Ulrich von Agris
November 25, 2012 - 10:50am

Hi all,

I have downloaded an installed Aperture Inspector 1.2. Then I dragged my Aperture Library on it and let it run. After one night I still saw the spinning wheel and the message that it is reading the Library file. My library is 7,23 GB. I quit the program and restarted. Now it is running for another hour and the wheel keeps spinning. Is this still OK? I'm on a 2,6 GHZ i7 Macbook Pro. Thanks for your advice.

Ulrich

Stig Bordsenius's picture
by Stig Bordsenius
November 26, 2012 - 12:16pm

Hi Ulrich

Usually the process does not take more than one hour, and that is only if you have an enormous lbrary. WIth a small library i.e. less than 20K images it only takes a few minutes.

If you open “activity monitor” and see how much CPU Aperture inspector uses - it should be about 100% of one CPU if things are ok. If it is lower it has probably closed down due to an error.

If this is the case we suggest you try the cleaning-process here, and then try to run the app again after that.

You may login with either your assigned username or your e-mail address.
Passwords are case-sensitive - Forgot your password?
randomness